What battery is required for my panel heater and how do I replace?

Modified on Mon, 16 Oct, 2023 at 1:36 PM

A CR2032 coin type battery is required.


To replace the battery, follow the steps below and is also shown in the image below. 

  1. Unhinged the heater from the wall using the clips shown in the image below and locate the battery module. 
  2. Slide the catch and pull module from the controls. 
  3. Remove the coin cell battery and replace, with the battery facing positive (+) side up. 
  4. Slide module back in place, ensuring clip is engaged. 



Applicable Models: 

PLX050E PLX075E PLX100E PLX125E PLX150E GFP050BE GFP075BE GFP100BE GFP150BE GFP200BE

GFP050WE GFP075WE GFP100WE GFP150WE GFP200WE MFP050E MFP075E MFP100E MFP150E MFP200E

LPP050E LPP075E LPP100E LPP150E QRAD050RF QRAD075RF QRAD100RF QRAD150RF QRAD200RF

QRAD050E QRAD075E QRAD100E QRAD150E QRAD200E BPH100M BH100G CEP500E CEP750E CEP1000E CEP1500E CEP2000E CEP050E CEP075E CEP100E CEP150E CEP200E 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article