Will my panel convector heater still work after a power cut?

If there is a power cut, the heater will be unable to heat up until power has been restored.

Once power is restored, the heater should not need any input from yourself as the heater has a backup battery remembering the date & time and the settings are held.

If there has been a power cut for several days and the house has gone cold, it may take a few days to heat up the fabric of the building in very cold weather conditions.

If after a power cut, your heater is prompting you to enter the date and time, do this and it will then make the heater work. However, this is a sign that the backup battery for the clock on the heater requires replacing.

Please refer to the instructions for your exact model of heater on how to change this battery - most models will have a battery drawer which slides out and will enable you to change the CR2032 coin cell battery:

https://help.gdhv.co.uk/support/solutions/articles/79000139242-what-battery-is-required-for-my-panel-heater-and-how-do-i-replace-

Applicable to models:  

PLX050E PLX075E PLX100E PLX125E PLX150E GFP050BE GFP075BE GFP100BE GFP150BE GFP200BE

GFP050WE GFP075WE GFP100WE GFP150WE GFP200WE MFP050E MFP075E MFP100E MFP150E MFP200E

LPP050E LPP075E LPP100E LPP150E QRAD050RF QRAD075RF QRAD100RF QRAD150RF QRAD200RF

QRAD050E QRAD075E QRAD100E QRAD150E QRAD200E BPH100M BH100G CEP500E CEP750E CEP1000E CEP1500E CEP2000E CEP050E CEP075E CEP100E CEP150E CEP200E LST050E LST075E LST100E LST150E

Require additional help? Please follow link below

https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321