How do I change the battery on my Quantum heater?

Modified on Tue, 26 Sep 2023 at 02:09 PM

This information is only applicable to Quantum heaters series G6/G7/G8/G9/G10/G11/Y/Z


Follow the steps below: 

 

  1. Push a small, flat headed screwdriver into the opening on the right hand side of the User Interface (Fig. 1) to release the retention clip. 

  1. Lift the User Interface module out, away from the heater, being careful not to damage the cable 

  1. Unscrew the battery cover (Fig. 2) to gain access to the battery holder. 

  1. Use a small, flat headed screwdriver to remove the battery from the battery holder and replace the battery. 

  1. Replace the battery access cover. 

  1. Push the User Interface module back into place, again avoiding damage to the cable. 

 

The Quantum storage heater is fitted with a replaceable CR2032 battery in the user interface. This battery controls the on-board clock to keep real time should the peak power supply be cut from the heater. This battery should work for more than 5 years. 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article